Connect an Elastic Kubernetes Service Cluster to HCP Consul Dedicated

17min
|
HCP
Consul

HashiCorp Cloud Platform (HCP) Consul is a fully managed Service Mesh as a Service version of Consul. After you deploy an HCP Consul Dedicated server cluster, you can connect the Consul resources in your network to HCP Consul Dedicated to leverage Consul's full feature set including service mesh and service discovery. For AWS, HCP Consul Dedicated supports Consul resources running on Elastic Kubernetes Service (EKS), Elastic Container Service (ECS), and virtual machine (EC2) workloads.

In this tutorial, you will configure your EKS cluster to connect to your HCP Consul cluster. Then, you will deploy HashiCups, a demo application that lets you view and order customized HashiCorp branded coffee, to your EKS cluster to leverage HCP Consul Dedicated's service discovery, service mesh, and ingress capabilities.

Prerequisites

For this tutorial, you will need:

An HCP HashiCorp Virtual Network (HVN)
An HCP Consul Dedicated deployment
An EKS Cluster deployed in the VPC peered with your HVN
AWS CLI
kubectl
helm
jq

For this tutorial, you will need to ensure that you have authenticated with the AWS CLI, and that the CLI is targeting the region where you have created your EKS cluster. Review the AWS documentation for instructions on how to configure the AWS CLI.

To ensure that communication between your HCP Consul Dedicated cluster servers and the Consul resources in your EKS cluster is possible, you must complete the steps detailed in either the manual deployment or in the Terraform deployment tutorial. It is also mandatory that your AWS EKS cluster is deployed in the VPC that has been associated with your HVN. Otherwise, there will not be a configured peering connection, and the control plane running on the HCP Consul Dedicated cluster servers will not be able to communicate with the data plane provided by the Consul resources that you will be installing to the EKS cluster.

Configure development host

Consul versions prior to 1.14.0 use a client-based architecture while the latest versions of Consul can support a more lightweight Dataplane architecture. Feel free to explore the Consul Dataplane documentation to learn more.

Select your version of HCP Consul Dedicated to ensure all instructions are relevant to your architecture.

First, connect to your EKS cluster. Kubernetes stores cluster connection information in a special file called kubeconfig. You can retrieve the Kubernetes configuration settings for your EKS cluster and merge them into your local kubeconfig file by issuing the following command.

$ aws eks --region [your-region] update-kubeconfig --name [your-cluster-name]

Customize and configure your Consul installation

In this section you will use the HCP Portal to retrieve the Consul configuration information you need to connect your EKS cluster Consul resources to your HCP Consul Dedicated cluster.

Navigate to the Consul resource page in the HCP portal, and then select the Consul cluster you want to connect with your EKS cluster. Set the name of your HCP Consul Dedicated cluster to the DATACENTER environment variable on your development host.

$ export DATACENTER=[your-cluster-name]

Within the HCP portal, click the Access Consul dropdown, then select the copy icon for the private address or public address field from the dialog box. The public or private address is now in your clipboard. Set this address to the RETRY_JOIN environment variable on your development host so that you can reference it later in the tutorial.

$ export RETRY_JOIN=[your-consul-address]

From the same Access Consul dropdown in the HCP UI, select Generate admin token and then click copy icon from the dialog box. A global-management root token is now in your clipboard. Set this token to the CONSUL_HTTP_TOKEN environment variable on your development host so that you can reference it later in the tutorial.

$ export CONSUL_HTTP_TOKEN=[your-token]

Create a consul namespace in your Kubernetes cluster. Your Consul secrets and resources will be created in this namespace.

$ kubectl create namespace consulnamespace/consul created

HCP Consul Dedicated is secure by default. This means that your EKS-based Consul resources need to be configured with a secure ACL token to establish secure communication with HCP. Create a Kubernetes secret with your Consul ACL token value.

$ kubectl create secret generic "consul-bootstrap-token" --from-literal="token=${CONSUL_HTTP_TOKEN}" --namespace consulsecret/consul-bootstrap-token created

Set the KUBE_API_URL environment variable to the API server URL of your EKS cluster.

Note

The following command relies on your cluster matching your current-context name. If you have created an alias for your context, or the current-context name does not match the cluster name for any other reason, you must manually set the KUBE_API_URL to the API server URL of your EKS cluster. You can use kubectl config view to view your cluster, and retrieve the API server URL.

$ export KUBE_API_URL=$(kubectl config view -o jsonpath="{.clusters[?(@.name == \"$(kubectl config current-context)\")].cluster.server}")

Validate that all of your environment variables have been set.

$ echo $DATACENTER && \  echo $RETRY_JOIN && \  echo $KUBE_API_URL && \  echo $CONSUL_VERSION

Example output:

learn-hcp-eks-cluster["learn-hcp-eks-cluster.private.consul.00000000-0000-0000-0000-000000000000.aws.hashicorp.cloud"]https://000000000000.gr7.us-west-2.eks.amazonaws.com1.14.0

Note

If any of these environment variables are not correctly set, the following script will generate an incomplete Helm values file, and the Consul Helm installation will not succeed.

Warning

The value for the global.name configuration must be unique for each Kubernetes cluster where Consul clients are installed and configured to join Consul as a shared service, such as HCP Consul Dedicated. You can change the global name through the global.name value in the Helm chart.

Install Consul on EKS

How you install Consul resources depends on your HCP Consul Dedicated Cluster:

To install Consul resources on a single Consul cluster, choose the Single Consul Cluster tab.
To install Consul resources on a primary or secondary Consul cluster that is part of a federated environment, select the Federated Consul Cluster tab.

Generate your customized Consul configuration file.

$ cat > values.yaml << EOFglobal:  name: consul  enabled: false  datacenter: ${DATACENTER}  image: "hashicorp/consul-enterprise:${CONSUL_VERSION}-ent"  acls:    manageSystemACLs: true    bootstrapToken:      secretName: consul-bootstrap-token      secretKey: token  tls:    enabled: true  enableConsulNamespaces: trueexternalServers:  enabled: true  hosts: ["${RETRY_JOIN}"]  httpsPort: 443  useSystemRoots: true  k8sAuthMethodHost: ${KUBE_API_URL}server:  enabled: falseconnectInject:  enabled: trueingressGateways:  enabled: true  defaults:    replicas: 1  gateways:    - name: ingress-gateway      service:        type: LoadBalancer        ports:          - port: 8080EOF

$ cat > values.yaml << EOFglobal:  name: consul  enabled: false  datacenter: ${DATACENTER}  image: "hashicorp/consul-enterprise:${CONSUL_VERSION}-ent"  acls:    manageSystemACLs: true    bootstrapToken:      secretName: consul-bootstrap-token      secretKey: token  tls:    enabled: true  federation:    enabled: true  enableConsulNamespaces: trueexternalServers:  enabled: true  hosts: ["${RETRY_JOIN}"]  httpsPort: 443  useSystemRoots: true  k8sAuthMethodHost: ${KUBE_API_URL}server:  enabled: falseconnectInject:  enabled: trueingressGateways:  enabled: true  defaults:    replicas: 1  gateways:    - name: ingress-gateway      service:        type: LoadBalancer        ports:          - port: 8080meshGateway:  enabled: trueEOF

Validate that the config file is populated correctly.

$ more values.yaml

Now that you have customized your values.yaml file, you can deploy Consul with Helm or the Consul K8S CLI. This should only take a few minutes. The Consul pods should appear in the pod list immediately.

Tip

HashiCorp Cloud Platform offers Enterprise features. To interact with these features, you need to install the Enterprise Consul binary for your client agents. Learn more information about Consul Enterprise and the Helm Chart in the Consul Enterprise Helm Chart documentation.

$ helm repo add hashicorp https://helm.releases.hashicorp.com"hashicorp" has been added to your repositories

$ helm install consul hashicorp/consul --values values.yaml --namespace consul --version "1.0.0"

Note

You can review the official Helm chart values to learn more about the default settings.

$ brew tap hashicorp/tap

$ brew install hashicorp/tap/consul-k8s

$ consul-k8s install -config-file=values.yaml -set global.image=hashicorp/consul:1.14.0

Note

You can review the official Consul K8S CLI documentation to learn more about additional settings.

To check the deployment process on the command line you can use kubectl get pods.

$ kubectl get pods --namespace consulNAME                                          READY   STATUS    RESTARTS   AGEconsul-connect-injector-6cbdb8d6c6-j4lqw      1/1     Running   0          2m11sconsul-connect-injector-6cbdb8d6c6-mmjxb      1/1     Running   0          2m11sconsul-controller-6c4c67bc87-f458m            1/1     Running   0          2m11sconsul-ingress-gateway-bf7df675b-vqvs4        1/1     Running   0          2m11sconsul-webhook-cert-manager-75d696b9d-bt8mp   1/1     Running   0          2m11s

Now that you have deployed HCP Consul Dedicated, you need to retrieve the Consul configuration information. You will use this information to configure the Consul resources on your EKS cluster to securely connect to the HCP Consul Dedicated cluster. In addition, you will retrieve the ACL token and HCP Consul Dedicated public URL to authenticate your Consul CLI.

Kubernetes stores cluster connection information in a special file called kubeconfig. You can retrieve the Kubernetes configuration settings for your EKS cluster and merge them into your local kubeconfig file by issuing the following command.

$ aws eks --region [your-region] update-kubeconfig --name [your-cluster-name]

You can use the HCP Portal to retrieve the client configuration information you need to connect your EKS cluster Consul resources to your HCP Consul Dedicated cluster. Navigate to the Consul resource page in the HCP portal, and then select the Consul cluster you want to connect with your EKS cluster.

Click the Access Consul dropdown and then select Download Consul configuration files to download a zip archive that contains the Consul configuration files. The archive includes a default client configuration and certificate. Both should be considered secrets, and should be kept in a secure location.

Unzip the client config package into the current working directory, and then use ls to confirm that both the client_config.json and ca.pem files are available.

$ lsca.pem             client_config.json

$ export CONSUL_HTTP_TOKEN=[your-token]

Create a consul namespace in your Kubernetes cluster. Your Consul secrets and resources will be created in this namespace.

$ kubectl create namespace consulnamespace/consul created

Configure Consul secrets

Consul Service on HCP is secure by default. This means that your EKS-based Consul resources need to be configured with the gossip encryption key, the Consul CA cert, and a root ACL token. All three of these secrets will need to be stored in the Kubernetes secrets engine so that they can be referenced and retrieved during the helm chart installation.

Use the ca.pem file in the current directory to create a Kubernetes secret to store the Consul CA certificate.

$ kubectl create secret generic "consul-ca-cert" --from-file='tls.crt=./ca.pem' --namespace consulsecret/consul-ca-cert created

The Consul gossip encryption key is embedded in the client_config.json file that you downloaded and extracted into your current directory. Issue the following command to create a Kubernetes secret that stores the Consul gossip key encryption key. The following command uses jq to extract the value from the client_config.json file.

$ kubectl create secret generic "consul-gossip-key" --from-literal="key=$(jq -r .encrypt client_config.json)" --namespace consulsecret/consul-gossip-key created

The last secret you need to add is an ACL bootstrap token. You can use the one you set to your CONSUL_HTTP_TOKEN environment variable earlier. Issue the following command to create a Kubernetes secret to store the bootstrap ACL token.

Note

If you are configuring a production environment, you should create a client token with a minimum set of privileges. For an in depth review of how to configure ACLs for Consul, refer to the Secure Consul with Access Control Lists tutorial or the official documentation.

$ kubectl create secret generic "consul-bootstrap-token" --from-literal="token=${CONSUL_HTTP_TOKEN}" --namespace consulsecret/consul-bootstrap-token created

Install Consul on EKS

Extract some more configuration values from the client_config.json file and set them to environment variables that can be used to generate your Helm values file. Issue the following command to set the DATACENTER environment variable.

$ export DATACENTER=$(jq -r .datacenter client_config.json)

Extract the private server URL from the client config so that it can be set in the Helm values file as the externalServers:hosts entry. This value will be passed as the retry-join option to the Consul clients.

$ export RETRY_JOIN=$(jq -r --compact-output .retry_join client_config.json)

Extract the public server URL from the client config so that it can be set the Helm values file as the k8sAuthMethodHost entry.

Note

The following script relies on your cluster matching your current-context name. If you have created an alias for your context, or the current-context name does not match the cluster name for any other reason, you must manually set the KUBE_API_URL to the API server URL of your EKS cluster. You can use kubectl config view to view your cluster, and retrieve API server URL.

$ export KUBE_API_URL=$(kubectl config view -o jsonpath="{.clusters[?(@.name == \"$(kubectl config current-context)\")].cluster.server}")

Set the Consul version to match your HCP cluster version.

$ export CONSUL_VERSION=1.13.2

Validate that all of your environment variables have been set.

$ echo $DATACENTER && \  echo $RETRY_JOIN && \  echo $KUBE_API_URL && \  echo $CONSUL_VERSION

Example output:

dc1["learn-hcp-eks-cluster.private.consul.00000000-0000-0000-0000-000000000000.aws.hashicorp.cloud"]https://000000000000.gr7.us-west-2.eks.amazonaws.com1.13.2

Note

If any of these environment variables are not correctly set, the following script will generate an incomplete Helm values file, and the Consul Helm installation will not succeed.

Warning

How you install Consul clients depends on your HCP Consul Dedicated Cluster:

To install clients on a single Consul cluster, choose the Single Consul Cluster tab.
To install clients on a primary or secondary Consul cluster that is part of a federated environment, select the Federated Consul Cluster tab.

Generate the Helm values file.

$ cat > values.yaml << EOFglobal:  name: consul  enabled: false  datacenter: ${DATACENTER}  image: "hashicorp/consul-enterprise:${CONSUL_VERSION}-ent"  acls:    manageSystemACLs: true    bootstrapToken:      secretName: consul-bootstrap-token      secretKey: token  gossipEncryption:    secretName: consul-gossip-key    secretKey: key  tls:    enabled: true    enableAutoEncrypt: true    caCert:      secretName: consul-ca-cert      secretKey: tls.crt  enableConsulNamespaces: trueexternalServers:  enabled: true  hosts: ["${RETRY_JOIN}"]  httpsPort: 443  useSystemRoots: true  k8sAuthMethodHost: ${KUBE_API_URL}server:  enabled: falseclient:  enabled: true  join: ${RETRY_JOIN}connectInject:  enabled: truecontroller:  enabled: trueingressGateways:  enabled: true  defaults:    replicas: 1  gateways:    - name: ingress-gateway      service:        type: LoadBalancer        ports:          - port: 8080EOF

$ cat > values.yaml << EOFglobal:  name: consul  enabled: false  datacenter: ${DATACENTER}  image: "hashicorp/consul-enterprise:${CONSUL_VERSION}-ent"  acls:    manageSystemACLs: true    bootstrapToken:      secretName: consul-bootstrap-token      secretKey: token  gossipEncryption:    secretName: consul-gossip-key    secretKey: key  tls:    enabled: true    enableAutoEncrypt: true    caCert:      secretName: consul-ca-cert      secretKey: tls.crt  federation:    enabled: true  enableConsulNamespaces: trueexternalServers:  enabled: true  hosts: ["${RETRY_JOIN}"]  httpsPort: 443  useSystemRoots: true  k8sAuthMethodHost: ${KUBE_API_URL}server:  enabled: falseclient:  enabled: true  join: ${RETRY_JOIN}connectInject:  enabled: truecontroller:  enabled: trueingressGateways:  enabled: true  defaults:    replicas: 1  gateways:    - name: ingress-gateway      service:        type: LoadBalancer        ports:          - port: 8080meshGateway:  enabled: trueEOF

Validate that the config file is populated correctly.

$ more values.yaml

Deploy Consul

Now that you have customized your values.yaml file, you can deploy Consul with Helm or the Consul K8S CLI. We recommend you deploy Consul into its own dedicated namespace as shown below. This should only take a few minutes. The Consul pods should appear in the pod list immediately.

Tip

$ helm repo add hashicorp https://helm.releases.hashicorp.com"hashicorp" has been added to your repositories

$ helm install consul hashicorp/consul --values values.yaml --namespace consul --version "0.49.0"

Note

You can review the official Helm chart values to learn more about the default settings.

$ brew tap hashicorp/tap

$ brew install hashicorp/tap/consul-k8s

$ consul-k8s install -config-file=values.yaml

Note

You can review the official Consul K8S CLI documentation to learn more about additional settings.

To check the deployment process on the command line you can use kubectl get pods.

$ kubectl get pods --namespace consulNAME                                           READY   STATUS    RESTARTS   AGEconsul-client-lqfg2                            1/1     Running   0          74sconsul-client-n2bgm                            1/1     Running   0          74sconsul-client-r7kq6                            1/1     Running   0          74sconsul-connect-injector-67498ddc87-5z9jh       1/1     Running   0          74sconsul-connect-injector-67498ddc87-85q2g       1/1     Running   0          74sconsul-controller-66dbfd4f77-l59dp             1/1     Running   0          74sconsul-ingress-gateway-584dcbc5bd-xfbcj        2/2     Running   0          74sconsul-webhook-cert-manager-7cf6df6c4f-tbx82   1/1     Running   0          74s

$ kubectl get pods --namespace consulNAME                                           READY   STATUS    RESTARTS   AGEconsul-client-5mvcz                            1/1     Running   0          2m5sconsul-client-gz8mb                            1/1     Running   0          2m5sconsul-client-zhrk7                            1/1     Running   0          2m5sconsul-connect-injector-67498ddc87-f5d7r       1/1     Running   0          2m4sconsul-connect-injector-67498ddc87-jm5nf       1/1     Running   0          2m5sconsul-controller-66dbfd4f77-f5dmc             1/1     Running   0          2m5sconsul-ingress-gateway-584dcbc5bd-q2dw4        2/2     Running   0          2m5sconsul-mesh-gateway-556988f6fb-2l4v5           2/2     Running   0          2m5sconsul-mesh-gateway-556988f6fb-rx2qk           2/2     Running   0          2m5sconsul-webhook-cert-manager-7cf6df6c4f-6h7pm   1/1     Running   0          2m5s

meshGateway.enabled is enabled in values.yaml for this cluster. Mesh gateways enable traffic between services across different clusters. Now you need to make sure that every cluster in your federation has set meshGateway.enabled to true and redeploy if needed. Otherwise there is no counterpart for this clusters' mesh gateway to talk to.

There are multiple modes of running mesh gateway across your federation, follow this guide to set the mode to local. local will make every service in your cluster use the mesh gateway that is local to this cluster.

Deploy an example workload

Now that the Consul resources have been deployed on EKS, it is time to deploy an application workload. This tutorial will use the HashiCups demo application, an ingress gateway, and service intentions.

Issue the following command to clone the repository.

$ git clone https://github.com/hashicorp/terraform-aws-hcp-consul

Change directory into the example repository.

$ cd terraform-aws-hcp-consul/modules/k8s-demo-app

Issue the following command to deploy the demo application, ingress gateway, and service intentions to your EKS cluster.

$ kubectl apply -f services/

Example output:

service/frontend createdserviceaccount/frontend createdconfigmap/nginx-configmap createddeployment.apps/frontend createdservice/product-api-service createdserviceaccount/product-api createdconfigmap/db-configmap createddeployment.apps/product-api createdservice/postgres createdserviceaccount/postgres createddeployment.apps/postgres createdservice/public-api createdserviceaccount/public-api createddeployment.apps/public-api createdserviceintentions.consul.hashicorp.com/ingress-gateway-to-frontend createdserviceintentions.consul.hashicorp.com/frontend-to-public-api createdserviceintentions.consul.hashicorp.com/public-api-to-product-api createdserviceintentions.consul.hashicorp.com/product-api-to-postgres created

Access the HashiCups UI

With the resources in place, retrieve the public URL and port of the ingress gateway.

$ kubectl get svc --namespace consulNAME                        TYPE           CLUSTER-IP       EXTERNAL-IP                                                               PORT(S)                         AGEconsul-ingress-gateway      LoadBalancer   172.20.81.249    a7b5d9e6f022548259fa0d616ca8aaf1-1451754202.us-east-1.elb.amazonaws.com   8080:32166/TCP,8443:31069/TCP   8m54s...TRUNCATED

Verify you have successfully deployed the application by visiting your unique ingress gateway EXTERNAL-IP DNS address in your browser, or use the following curl command.

$ INGRESS_GATEWAY=$(kubectl get svc/consul-ingress-gateway --namespace consul -o json | jq -r '.status.loadBalancer.ingress[0].hostname') && \    echo "Connecting to \"$INGRESS_GATEWAY\"" && \    curl -H "Host: nginx.ingress.consul" "http://$INGRESS_GATEWAY:8080"

Example output:

Connecting to "a32115aa6b19546e188afc44fbb8f3b3-1889150178.us-west-2.elb.amazonaws.com"&lt;!doctype html&gt;...TRUNCATED...&lt;/html&gt;

This validates that Consul service discovery is working, because the services are able to resolve the upstreams. This also validates that Consul service mesh is working, because the intentions that were created are allowing services to interact with one another.

Next steps

In this tutorial, you connected your EKS environment to HCP Consul Dedicated and deployed a demo application. To keep learning about Consul's features, and for step-by-step examples of how to perform common Consul tasks, complete one of the following tutorials.

If you encounter any issues, please contact the HCP team at support.hashicorp.com.

Configure EC2 for HCP

Migrate to HCP

This tutorial also appears in:

5 tutorials

Connect services
Deploy managed Consul in AWS and Azure. Connect client virtual machines (AWS EC2 and Azure VM), Kubernetes (EKS and AKS) clients, and Elastic Container Service (ECS) clients.
- Consul